VerifyGN puts machine vision and 3D measurement right on your line. It catches every defect and out-of-tolerance part as it's made — and tells the line how to correct itself, before the scrap piles up.
On automotive lines since 20195 lakh+ parts inspected
Manual inspection depends on a few skilled people, samples instead of checking every part, and only catches a defect long after the line has already made it. The drift you miss becomes the scrap — and the chargeback — you pay for.
Sources: Economic Times · American Society for Quality
Detect, measure, correct and trace — on the same line, from the same scan. Replace a wall of point tools and a manual CMM with one inline system.
AI vision flags surface defects, cracks, missing parts and assembly errors in real time, at line speed.
3D metrology and profile inspection check every dimension against the drawing — inline, no manual CMM step.
Closed-loop correction tells the line which stand or setting to adjust — and re-verifies the fix.
Every part is matched to its route card and logged — so the right product ships with the right paperwork.
Finding a bad part is table stakes. VerifyGN measures how far off it is, works out what's causing the drift, and feeds the correction back to the line — so the next part is in tolerance instead of in the scrap bin.
Example: a bent casting or a roll-formed profile drifting out of spec — detected, measured, and straightened, with the fix verified on the next part.
AI vision flags the defect and classifies it the moment it appears on the line.
3D vision quantifies the deviation — magnitude and direction against the nominal geometry.
The system computes the correction, drives or advises the adjustment, then checks the next part.
Fixed on the line, down a bore, or in an operator's hand — the same inspection engine, in the form factor the job needs.
A sealed cell that inspects every part at takt time, right inside the manufacturing line.
Reaches inside diameters and weld seams to inspect surfaces a camera can't see from outside.
A rugged handheld for spot inspection and tracking parts where a fixed station isn't practical.
Wherever a defect or a tenth of a millimetre reaches the customer, VerifyGN sits on the line.
Anyone can sell a sensor. The value is in reading your drawing, correcting the cause, and getting better at your parts the longer it runs.
Works across camera and sensor brands, so you're never locked to one supplier's catalogue.
Reads GD&T and the governing standard (EN, ISO, ASTM) straight into pass/fail logic.
The correction model improves per mill and per part the more it runs — the moat a boxed sensor can't match.
Native PLC / OPC-UA on Indian shop floors, with engineering support from Trivandrum and Pune.
Send us a part and a drawing, and we'll show you the inspection — and the ROI — on one of your lines.
kesava.prasad@verifygn.com · Trivandrum & Pune, India